200 LB STULL FEEDERS
200 LB Standard Stull Feeder for ALL ATVs (4-Wheelers)
This feeder holds up to 200 lbs. of whole corn and is gravity flow, manual operation. It is perfect for use with any bunk feeder and will dispense virtually any type of feed/cube. Also a great way to put out bait piles for wildlife. A retractable top allows for easy loading and the long handle allows the driver to easily open the feed door and regulate flow. The tapering chute folds up when not in use. Has a "built-in" toolbox. Two strut mounts allow for mounting to any ATV. Feeder Dimensions 18w x 36d x 24h (Assembly required) EMPTY FEEDER WEIGHT IS 87 POUNDS.
200 LB Stull Feeder with Top Rail Mounting Kit
This feeder holds up to 200 lbs. of whole corn and is gravity flow, manual operation. It is perfect for use with any bunk feeder and will dispense virtually any type of feed/cube. Also a great way to put out bait piles for wildlife. A retractable top allows for easy loading and the long handle allows the driver to easily open the feed door and regulate flow. The tapering chute folds up when not in use. Has a "built-in" toolbox.
This kit includes the 200-pound stull Feeder and all mounting hardware for the basic UTVs, which include 2-60in struts, all mounting hardware, and instructions for your basic UTV.
Kit will fit MOST UTV models: Gator, Polaris Ranger, Kubota, Bobcat, Treck, Chuck Wagon, Cub Cadet, Mule and 610 Mule, and other similar type beds. Feeder Dimensions 18w x 36d x 24h (Assembly required) EMPTY FEEDER WEIGHT IS 87 POUNDS.
200 LB Stull Feeder with Riser Mounting Kit
200 LB Stull Feeder with Riser Mounting Kit
This feeder holds up to 200 lbs. of whole corn and is gravity flow, manual operation. It is perfect for use with any bunk feeder and will dispense virtually any type of feed/cube. Also a great way to put out bait piles for wildlife. A retractable top allows for easy loading and the long handle allows the driver to easily open the feed door and regulate flow. The tapering chute folds up when not in use. Has a "built-in" toolbox.
This kit includes the 200 Pound Stull Feeder with Riser Mounting Kit for ALL late model and older model UTVs. This kit makes for easy removal of the Stull Feeder. Or when mounted to 3/4" plywood, cut to measurement inside of the bed, will allow for quick and easy removal of the feeder. Plywood is not included.
Feeder Dimensions 18w x 36d x 24h (Assembly required) EMPTY FEEDER WEIGHT IS 87 POUNDS.
300 LB STULL FEEDERS
300 LB Auger Fed Grain/Cube Feeder w/Chain Drive for UTVs
300 LB Auger Fed Grain/Cube Feeder w/Chain Drive for UTVs
300 LB Auger Fed Grain/Cube Feeder w/Chain Drive for UTVs
This feeder sits down inside the bed of a UTV. It is made of 16 GA Galvanized Steel and has a 4-inch chain-driven auger. There is a rope to control the chute up and down from the cab without getting out. It has a 12-volt motor with an "on-demand" style switch for easy control from your seat that works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR UTV MECHANIC. MOTOR DRAWS 30 AMPS)
The auger cover inside of the feeder adjusts for different feed types. This feeder can hold up to 300 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is made to bolt to the bottom of the UTV bed. If mounted on load cells for a scale you must use extra metal between the load cell and the bottom of the feeder for reinforcement. We offer a bracket for this. If mounted to 3/4" plywood, and cut to the measurement of a UTV bed, makes for quick and easy removal. Plywood is not included. Feeder Dimensions 21w x 43d x 36h. EMPTY FEEDER WEIGHT IS 175 POUNDS.
300 LB Auger Feeder w/Chain Drive and Actuator
300 LB Auger Fed Grain/Cube Feeder w/Chain Drive for UTVs
300 LB Auger Fed Grain/Cube Feeder w/Chain Drive for UTVs
This feeder sits down inside the bed of a UTV. It is made of 16 GA Galvanized Steel and has a 4-inch chain-driven auger. There is an actuator to control the chute up and down from the cab without getting out. It has a 12-volt motor with an "on-demand" style switch and toggle to control actuator for easy control from your seat that works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR UTV MECHANIC. MOTOR DRAWS 30 AMPS)
The auger cover inside of the feeder adjusts for different feed types. This feeder can hold up to 300 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is made to bolt to the bottom of the UTV bed. If mounted on load cells for a scale you must use extra metal between the load cell and the bottom of the feeder for reinforcement. We offer a bracket for this. If mounted to 3/4" plywood, and cut to the measurement of a UTV bed, makes for quick and easy removal. Plywood is not included. Feeder Dimensions 21w x 43d x 36h. EMPTY FEEDER WEIGHT IS 180 POUNDS.
300 LB Auger Feeder w/Chain Drive and Digital Scale Kit
This feeder comes with a 5,000 lb. Digital Scale Kit is ready to bolt in place and start using. It sits down inside the bed of a UTV. It is made of 16 GA Galvanized Steel and has a 4-inch chain-driven auger. There is a rope to control the chute up and down from the cab without getting out. It has a 12-volt motor with a 20ft "on demand" style switch for easy control from your seat that works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR UTV MECHANIC. MOTOR DRAWS 30 AMPS)
The auger cover inside of the feeder adjusts for different feed types. This feeder can hold up to 300 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is made to bolt to the bottom of the UTV bed. If mounted to 3/4" plywood, and cut to the measurement of a UTV bed, makes for quick and easy removal. Plywood is not included. Feeder Dimensions 24w x 45d x 40h. EMPTY FEEDER WEIGHT IS 195 POUNDS.
300 LB Auger Feeder w/Chain Drive, Actuator and Digital Scale Kit
This feeder comes with a 5,000 lb. Digital Scale Kit is ready to bolt in place and start using. It sits down inside the bed of a UTV. It is made of 16 GA Galvanized Steel and has a 4-inch chain-driven auger. There is an actuator to control the chute up and down from the cab without getting out. It has a 12-volt motor with a 20ft "on demand" style switch with a toggle to control the actuator from your seat that works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR UTV MECHANIC. MOTOR DRAWS 30 AMPS)
The auger cover inside of the feeder adjusts for different feed types. This feeder can hold up to 300 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is made to bolt to the bottom of the UTV bed. If mounted to 3/4" plywood, and cut to the measurement of a UTV bed, makes for quick and easy removal. Plywood is not included. Feeder Dimensions 24w x 45d x 40h. EMPTY FEEDER WEIGHT IS 200 POUNDS.
400 LB STULL FEEDERS
400 LB Stull Feeder with Top Rail Mounting Kit
This feeder holds up to 400 lbs. of whole corn and is gravity flow, manual operation. It is perfect for use with any bunk feeder and will dispense virtually any type of feed/cube. Also a great way to put out bait piles for wildlife. A retractable top allows for easy loading and the long handle allows the driver to easily open the feed door and regulate flow. The tapering chute folds up when not in use.
This kit includes the 400 Pound Stull Feeder and all mounting hardware for basic UTVs. The Basic UTV Mounting Kit would allow the feeder to be mounted to most UTVs.
The basic kit is for older model UTVs: Mule, Gator, Club Cadet, Kubota, Bobcat, Treck, Chuck Wagon, Club Car, Polaris Ranger, Kawasaki Mule models, and other similar type beds. Feeder Dimensions 30w x 40d x 24h (Assembly required) EMPTY FEEDER WEIGHT IS 175 POUNDS.
400 LB Stull Feeder with Riser Mounting Kit for ALL UTVs
This feeder holds up to 400 lbs. of whole corn and is gravity flow, manual operation. It is perfect for use with any bunk feeder and will dispense virtually any type of feed/cube. Also a great way to put out bait piles for wildlife. A retractable top allows for easy loading and the long handle allows the driver to easily open the feed door and regulate flow. The tapering chute folds up when not in use.
This kit includes the 400-pound Stull Feeder with Riser Mounting Kit for ALL UTVs. Kit replaces top rail mount and mounts to bed floor of UTV to support feeder. Or when mounted to 3/4" plywood, cut to measurement inside of the bed, will allow for quick and easy removal of the feeder. Plywood is not included. Feeder Dimensions 30w x 40d x 24h (Assembly required) EMPTY WEIGHT IS 175 POUNDS.
600 - 650 LB FEEDERS
600 LB Auger Fed Grain/Cube Feeder w/Chain Drive for UTV's
This feeder sits down inside the bed of a UTV. It is made of 16 GA Galvanized Steel and has a 4-inch Chain Driven auger. There is a rope to control the chute up and down from the cab without getting out. It has a 12-volt motor with an "on-demand" style switch for easy control from your seat that works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR UTV MECHANIC. MOTOR DRAWS 30 AMPS)
The auger cover inside of the feeder adjusts for different feed types. This feeder can hold up to 600 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is made to bolt to the bottom of the UTV bed. If mounted on load cells for a scale you must use extra metal between the load cell and the bottom of the feeder for reinforcement. We offer a bracket for this. If mounted to 3/4" plywood, and cut to the measurement of a UTV bed, makes for quick and easy removal. Plywood is not included.
**NOTE: SOME UTVs MAY REQUIRE BOLTING TO PLYWOOD OR 2X4 TO HELP CHUTE DROP OVER SIDE PROPERLY** Feeder Dimensions 30w x 43d x 41h. EMPTY FEEDER WEIGHT IS 220 POUNDS.
600 LB Auger Feeder w/Chain Drive and Actuator
This feeder sits down inside the bed of a UTV. It is made of 16 GA Galvanized Steel and has a 4-inch chain-driven auger. There is an actuator to control the chute up and down from the cab without getting out. It has a 12-volt motor with a 20ft "on demand" style switch and toggle to control the actuator from your seat that works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR UTV MECHANIC. MOTOR DRAWS 30 AMPS)
The auger cover inside of the feeder adjusts for different feed types. This feeder can hold up to 600 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is made to bolt to the bottom of the UTV bed. If mounted on load cells for a scale you must use extra metal between the load cell and bottom of the feeder for reinforcement. We offer a bracket for this. If mounted to 3/4" plywood, and cut to the measurement of a UTV bed, makes for quick and easy removal. Plywood is not included. Feeder Dimensions 30d x 43w x 41h. EMPTY FEEDER WEIGHT IS 225 POUNDS.
600 LB Auger Feeder w/Chain Drive and Digital Scale Kit
600 LB Auger Fed Grain/Cube Feeder w/Chain Drive and Trailer
This feeder comes with a 5,000 lb. Digital Scale Kit is ready to bolt in place and start using. It sits down inside the bed of a UTV. It is made of 16 GA Galvanized Steel and has a 4-inch chain-driven auger. There is a rope to control the chute up and down from the cab without getting out. It has a 12-volt motor with a 20ft "on demand" style switch for easy control from your seat that works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR UTV MECHANIC. MOTOR DRAWS 30 AMPS)
The auger cover inside of the feeder adjusts for different feed types. This feeder has a capacity to hold up to 600 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is made to bolt to the bottom of the UTV bed. If mounted to 3/4" plywood, and cut to the measurement of a UTV bed, makes for quick and easy removal. Plywood is not included. Feeder Dimensions 33d x 45w x 45h. EMPTY FEEDER WEIGHT IS 250 POUNDS.
600 LB Auger Fed Grain/Cube Feeder w/Chain Drive and Trailer
600 LB Auger Fed Grain/Cube Feeder w/Chain Drive and Trailer
This feeder is made of 16 GA Galvanized Steel and has a 4-inch chain-driven auger. There is a rope to control the chute up and down from the cab without getting out. It has a 12-volt motor with a 20ft "on demand" style switch to control the motor from your seat. The motor works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR LOCAL UTV MECHANIC. MOTOR DRAWS 30 AMPS)
The auger cover inside of the feeder adjusts for different feed types. This feeder can hold up to 600 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. Feeder Dimensions 30d x 43w x 41h. Trailer Dimensions 31d x 43w x 27h. Overall Dimensions are 31d x 43w x 68h with a 48" tongue and a 2" Ball (Some Assembly May Be Required) EMPTY FEEDER/TRAILER WEIGHT IS 320 POUNDS
600 LB Auger Feeder w/Chain Drive, Actuator and Digital Scale Kit
This feeder comes with a 5,000 lb. Digital Scale Kit is ready to bolt in place and start using. It sits down inside the bed of a UTV. It is made of 16 GA Galvanized Steel and has a 4-inch chain-driven auger. There is an actuator to control the chute up and down from the cab without getting out. It has a 12-volt motor with a 20ft "on demand" style switch with a toggle to control the actuator from your seat that works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR UTV MECHANIC. MOTOR DRAWS 30 AMPS)
The auger cover inside of the feeder adjusts for different feed types. This feeder has a capacity to hold up to 600 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is made to bolt to the bottom of the UTV bed. If mounted to 3/4" plywood, and cut to the measurement of a UTV bed, makes for quick and easy removal. Plywood is not included. Feeder Dimensions 33d x 45w x 45h. EMPTY FEEDER WEIGHT IS 245 POUNDS.
600 LB Auger Fed Grain/Cube Feeder w/Chain Drive, Trailer and Digital Scale
This trailer/feeder comes with a 5,000 lb. Digital Scale Kit. The feeder is made of 16 GA Galvanized Steel and has a 4-inch chain-driven auger. There is a rope to control the chute up and down from the cab without getting out. It has a 12-volt motor with a 20ft "on demand" style switch to control the motor from your seat. The motor works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR LOCAL UTV MECHANIC. MOTOR DRAWS 30 AMPS)
The auger cover inside of the feeder adjusts for different feed types. This feeder can hold up to 600 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. Feeder Dimensions 30d x 43w x 41h. Trailer Dimensions 31d x 43w x 27h. Overall Dimensions are 31d x 43w x 68h with a 48" tongue and a 2" Ball (Some Assembly May Be Required) EMPTY FEEDER/TRAILER WEIGHT IS 320 POUNDS
600 LB Auger Fed Grain/Cube Feeder w/Chain Drive, Trailer, Actuator and Scale
This trailer/feeder comes with a 5,000 lb. Digital Scale Kit. The feeder is made of 16 GA Galvanized Steel and has a 4-inch chain-driven auger. There is an actuator to control the chute up and down from the cab without getting out. It has a 12-volt motor with a 20ft "on demand" style switch and a toggle to control the motor/actuator from your seat. The motor works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR LOCAL UTV MECHANIC. MOTOR DRAWS 30 AMPS)
The auger cover inside of the feeder adjusts for different feed types. This feeder can hold up to 600 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. Feeder Dimensions 30d x 43w x 45h. Trailer Dimensions 31d x 43w x 27h. Overall Dimensions are 31d x 43w x 72h with a 48" tongue and a 2" Ball (Some Assembly May Be Required) EMPTY FEEDER/TRAILER WEIGHT IS 340 POUNDS
600 LB Grain/Cube Drag Feeder for UTV's
This feeder sits down inside the bed of a UTV. The box of this feeder is 16 GA galvanized steel with a 12 GA galvanized steel conveyor frame. It has a 6-inch wide conveyor belt to deliver almost any type of feed. There is a rope to control the chute up and down from the cab without getting out. It has a 12-volt motor with an "on-demand" style switch for easy control from your seat that works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR UTV MECHANIC. MOTOR DRAWS 50 AMPS)
There is NO cover inside the hopper over the belt to disturb the flow of feed. This feeder has a capacity to hold up to 600 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is designed for bolting to the bottom of the UTV bed. If mounted on load cells for a scale you must use extra metal between the load cell and the bottom of the feeder for reinforcement. We offer a bracket for this. If mounted to 3/4" plywood, and cut to the measurement of a UTV bed, makes for quick and easy removal. Plywood is not included. **NOTE: SOME UTVs MAY REQUIRE BOLTING TO PLYWOOD OR 2X4 TO HELP CHUTE DROP OVER SIDE PROPERLY** Feeder Dimensions 30w x 44d x 39h. EMPTY FEEDER WEIGHT IS 290 POUNDS.
600 LB Grain/Cube Drag Feeder w/Digital Scale for UTV's
This feeder comes with a 5,000 lb. Digital Scale Kit is ready to bolt in place and start using. This feeder sits down inside the bed of a UTV. The box of this feeder is 16 GA galvanized steel with a 12 GA galvanized steel conveyor frame. It has a 6-inch wide conveyor belt to deliver almost any type of feed. There is a rope to control the chute up and down from the cab without getting out. It has a 12-volt motor with an "on-demand" style switch for easy control from your seat that works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR UTV MECHANIC. MOTOR DRAWS 50 AMPS)
There is NO cover inside the hopper over the belt to disturb the flow of feed. This feeder can hold up to 600 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is designed for bolting to the bottom of the UTV bed. If mounted on load cells for a scale you must use extra metal between the load cell and the bottom of the feeder for reinforcement. We offer a bracket for this. If mounted to 3/4" plywood, and cut to the measurement of a UTV bed, makes for quick and easy removal. Plywood is not included. **NOTE: SOME UTVs MAY REQUIRE BOLTING TO PLYWOOD OR 2X4 TO HELP CHUTE DROP OVER SIDE PROPERLY** Feeder Dimensions 30w x 44d x 39h. EMPTY FEEDER WEIGHT IS 290 POUNDS.
650 LB Dog Box Grain/Cube Auger Feeder w/Chain Drive for UTV's
650 LB Dog Box Grain/Cube Auger Feeder w/Chain Drive for UTV's
This Dog Box feeder has 2 compartments that are 21"W x21" D and sits down inside the bed of a UTV. It is designed with the idea of being able to carry your dogs with you while you are feeding. There are lots of other uses though including for storage. It is made of 16 GA Galvanized Steel and has a 4-inch chain-driven auger. There is a rope to control the chute up and down from the cab without getting out. It has a 12-volt motor with an "on-demand" style switch for easy control from your seat that works off of a Deep Cycle auxiliary battery (NOT INCLUDED)
(DO NOT ATTACH TO YOUR UTV BATTERY UNTIL YOU TALK TO YOUR UTV MECHANIC. MOTOR DRAWS 30 AMPS)
The auger cover inside of the feeder adjusts for different feed types. This feeder can hold up to 650 pounds of whole corn. It is a great feeder to feed all types of livestock including bait piles for wildlife. This unit is made to bolt to the bottom of the UTV bed. If mounted on load cells for a scale you must use extra metal between the load cell and the bottom of the feeder for reinforcement. We offer a bracket for this. If mounted to 3/4" plywood, and cut to the measurement of a UTV bed, makes for quick and easy removal. Plywood is not included. Feeder Dimensions 33D x 43W x 41T. EMPTY FEEDER WEIGHT IS 275 lbs.